• Narrow screen resolution
  • Wide screen resolution
  • Decrease font size
  • Default font size
  • Increase font size
Tilting Disc Check Valve PDF Print E-mail

Download the spec sheet 


Valves are manufactured and tested in accordance with
EN 12334 PN 10/16/25, TIS 383 PN 6/10/16. MSS-SP 71 class
125/250, and also meet the requirements of AWWA C508. The
tilting disc and 2 pieces bodies designed check valve
accomplishes full flow opening by having the disc pivot or tilt
in the flow media. The opening stroke range in much less than
that of the coventional swing check valves, therefore reduces
opening and closing time critical to controlling flow reversal and
reducing water hammer. The full flow area with lower headloss
ensure SCI tilting disc check valve will operate with the highest
efficiency and durability.



  •  Sizes are available from DN 150 mm. - DN 1800 mm.(6"-72")
  • Flange driling to suit ANSI B16.1, EN 1092, BS 10, ANSI B16.5, AS 2129 and JIS.
  • Optional accessories : Signal switch, By-pass, Hydraulic cylinder (top / bottom / side mounted)


  •  Suitable for all type of water, air and steam 121 C or 250 F (For higher temperature, consult factory).